Camburg 98-12 Ford Ranger 2wd/4wd Heim Steering Kit
SKU CAM-130003
MPN cmbCAM-130003
$499.99 · Available to order
Camburg 98-12 Ford Ranger 2wd/4wd Heim Steering Kit
The stock inner tie-rod ball-joint joint on the 1998-2012 Rangers is known for failing under off-road conditions, so we came up with a solution for this problem. The steering clevis is CNC machined from heat-treated 17-4 H1150 stainless steel along with the custom bolt that attaches it to the factory steering rack. We us a FK 3/4" JMX series heim with a pair of stainless spacers. We also machine the tie rod that goes from the heim to the factory outer tie-rod from 17-4 H1150 stainless for optimum strength. This steering upgrade is mandatory for Rangers if you drive your truck off-road. These bolt right up and solves the problem with the stock steering parts. Fits both coil spring and torsion bar trucks. Replaces the weak inner ball-joint and tie-rod Machined from 17-4 H1150 stainless steel FK 3/4" JMX Heims Made in the USA.
| Years | Make | Model | Submodel | Drive |
|---|---|---|---|---|
| 2004 | Ford | Ranger | Tremor | — |
| 2005–2007 | Ford | Ranger | STX | — |
| 1998–2011 | Ford | Ranger | XLT | — |
| 1998–2002 | Ford | Ranger | EV | — |
| 2005–2009 | Ford | Ranger | FX4 | — |
| 1998–2011 | Ford | Ranger | XL | — |
| 2006–2011 | Ford | Ranger | Sport | — |
| 2001–2005 | Ford | Ranger | Edge | — |
| 1998 | Ford | Ranger | Splash | — |
| 2002 | Ford | Ranger | Postal | — |
| Category | Drivetrain |
|---|---|
| Sub-Category | Axles |
| UPC | 888563186832 |
| CARB Approved | Yes |
| Prop 65 Warning | N |
| Special Order | Yes |
| Weight | 10 lb |
| Dimensions (L×W×H) | 10 × 8 × 4 in |