Granatelli Motor Sports

Granatelli 2.5in Stainless Steel Manual Exhaust Cutout

SKU 306525

MPN gms306525

$77.67 · In stock

Granatelli 2.5in Stainless Steel Manual Exhaust Cutout

Granatelli 2.5" Manual Exhaust Cutout Kit - Stainless Steel Weld-On: SKU: 306525. Want a wide-open exhaust at the track without running it loud every day? The Granatelli 306525 manual exhaust cutout kit is the simple, no-electronics way to do it: keep the block-off plate on for the street, and remove it when you want the exhaust open. Key Features: 2.5" size: Matches 2.5" outside-diameter exhaust tubing; Stainless steel construction: Resists rust and corrosion, a good choice for daily drivers and wet climates; Weld-on installation: Welds into your exhaust for a permanent, leak-free joint; Block-off plate: Closes the cutout for normal driving. Remove it to open the exhaust; No motor, wiring or vacuum lines: Nothing electrical to install or fail. Sizing & Fitment: Measure the outside diameter of your exhaust pipe at the mounting point. If it measures 2.5", this kit is the right match. Running a true dual exhaust? Use one cutout per side, or choose the dual 306525D kit. Can't weld? The 305525 clamp-on version installs with clamps. Where to Mount It: Mount the cutout at least 18 to 24 inches after the catalytic converters, and away from any O2 sensor. Point the opening toward the outside of the vehicle, away from fuel and brake lines, so exhaust doesn't collect under the car. For the best sound, mount it after the X-pipe or H-pipe. Because you remove the block-off plate by hand, choose a spot you can reach easily. Legal Note: Many states, including California, prohibit exhaust cutouts on vehicles driven on public roads. Keep the block-off plate installed on the street and remove it only at sanctioned off-highway events. Never install a cutout upstream of a catalytic converter. Frequently Asked Questions: How do I open it? Remove the block-off plate. Reinstall it to close the exhaust for street driving. Does it need a motor or wiring? No. This kit comes with a block-off plate only: no electric motor, no wiring and no vacuum pump kit.

Specifications
CategoryExhaust, Mufflers & Tips
Sub-CategoryExhaust Cutouts
UPC802735038132
CARB ApprovedNo
Prop 65 WarningY
Special OrderYes
Weight3 lb
Dimensions (L×W×H)12 × 10 × 6 in